Home / Label sizes / 6 × 4.25 in
6 × 4.25 in labels
Picture a 4 × 6 photo: 6 × 4.25 in (152 × 108 mm) is a little larger than that. Buyers usually put it on a 12 oz coffee pouch front (5.25 × 7.5 in) or a notebook cover (5.5 × 8.5 in). Expect about 28 lines of roughly 99 characters at 8 pt, and a full-size UPC-A barcode if you need one. Ordering 4.25 wide by 6 tall? Use this page and set the orientation on your artwork.
- Rectangle
- 6 × 4.25 in
- 152.4 × 108 mm
- 25.5 sq in
From $145.31 for 100 labels + $45.00 one-time setup
Today's prices
| Quantity | Roll labels | Per label | Sheet labels |
|---|---|---|---|
| 100 | $150.69 | $1.507 | $145.31 |
| 250 | $172.92 | $0.692 | $166.74 |
| 500 | $209.46 | $0.419 | $201.98 |
| 1,000 | $280.81 | $0.281 | $270.78 |
| 2,500 | $480.72 | $0.192 | $463.55 |
| 5,000 | $763.92 | $0.153 | $736.64 |
Matte white, Canadian dollars, tax not included. $45.00 artwork setup.
Good uses for the 6 × 4.25 in size
12 oz coffee pouch front label
Leaves 0.75 in at the sides and 0.5 in top and bottom on a 5.25 × 7.5 in surface.
On a notebook cover
Covers roughly 54% of that 5.5 × 8.5 in area – branded without hiding the pack.
Equipment and asset panels
Large instructions or a wiring diagram – 23 lines at 10 pt across 79 characters.
Event and trade-show signs
Table fronts and crates at shows: 152 × 108 mm reads from 13 ft.
Print-ready tips
Keep text and logos inside a 5.875 × 4.125 in safe area and do not go below 8 pt. Over 26 sq in, keep body text in columns no wider than about 4 in so it stays easy to read.
Flat surfaces should measure 6.25 × 4.5 in or more. Used as a wrap, 6 in covers a bottle of about 1.99 in diameter almost completely.
Compared with 10 × 2.5 in, 6 × 4.25 in has 2% more room – the next step, 6.5 × 4 in, adds 2%. The bigger 6.5 × 4 in runs about $8.80 extra for 1,000.
Label stocks
| Material | Finish (vs. matte white) |
|---|---|
| White paper | Matte, Gloss +6% |
| Clear (transparent) | Standard (included) +14% |
| Freezer-grade white | Standard (included) +22% |
Labels per roll
| Core | Max. roll diameter | Up to (approx.) |
|---|---|---|
| 3″ core (standard) | 10″ | 2,900 labels |
| 1″ core | 5″ | 780 labels |
One wide, 3 mm apart (estimate)
Questions about 6 × 4.25 in labels
Is 6x4.25 the same as 4.25x6?
Yes – it is one label turned 90°. We list width first (6 in) and height second (4.25 in); on a roll you choose which edge comes off first in the builder, so both orientations use this page and the same price.
What does a run of 6 × 4.25 in labels cost?
Prices drop with volume: 100 labels are $150.69, 1,000 are $280.81 ($0.281 each). One $45.00 setup applies per design.
What is the maximum roll size for 6 × 4.25 in labels?
A full 3″-core roll carries around 2,900; small 1″ cores about 780. Bigger orders ship on several rolls.
How do I avoid blurry 6 × 4.25 in labels?
Send at least 1,838 × 1,313 px for raster art – 300 dpi across the 6.125 × 4.375 in bleed area – or a vector PDF.
Similar sizes
- 6.5 × 4 in labels
- 10 × 2.5 in labels
- 7 × 3.75 in labels
- 5.5 × 4.5 in labels
- 7 × 3.5 in labels
- 9 × 3 in labels
- All label sizes
Ready for 6 × 4.25 in labels? Your price updates as you choose material and quantity.
Start my quote