Home / Label sizes / 3.75 × 1.25 in
3.75 × 1.25 in labels
With 4.69 square inches across 95 × 32 mm, the 3.75 × 1.25 in size is a slim strip about 3 times as long as it is tall. Typical homes for it: a wrap around the 1 oz dropper bottle (4.1 in round); the top of a deli container lid. For copy, count on about 7 lines of roughly 60 characters at 8 pt. A UPC-A barcode at 80% scale also fits. 1.25 × 3.75 is simply this size in the other orientation – same die, same price.
- Rectangle
- 3.75 × 1.25 in
- 95.3 × 31.8 mm
- 4.69 sq in
Smallest run 100 = $83.93, setup $45.00 extra
Prices by quantity
| Quantity | Roll labels | Per label | Sheet labels |
|---|---|---|---|
| 100 | $87.04 | $0.870 | $83.93 |
| 250 | $103.46 | $0.414 | $99.77 |
| 500 | $116.77 | $0.234 | $112.60 |
| 1,000 | $113.34 | $0.113 | $109.29 |
| 2,500 | $143.10 | $0.057 | $137.99 |
| 5,000 | $211.79 | $0.042 | $204.23 |
CAD, matte white, pre-tax · +$45.00 setup/design
Good uses for the 3.75 × 1.25 in size
Full wrap: 1 oz dropper bottle
3.75 in around a 4.1 in body is a near-complete wrap; keep barcodes away from the 0.35 in seam.
Tops of deli container lids
The 4.1 in usable top takes it with a 0.15 in margin all round.
Locker and name strips
3.75 in fits a full name at 37 pt for lockers, cubbies and mailboxes.
Box seals
Placed over the opening, 1.9 in sits on each side of the seam.
Artwork advice
Keep text and logos inside a 3.625 × 1.125 in safe area and do not go below 7 pt. Place the barcode at least 0.2 in from either end – on the 1 oz dropper bottle the seam lands there.
Flat use: 4 × 1.5 in of face. Wrap use: about 1.27 in across or more, with 3.75 in going round.
Area-wise 3.75 × 1.25 in beats 2.25 × 2 in by 4%, and 2.75 × 1.75 in offers another 3%. The bigger 2.75 × 1.75 in runs about $5.09 extra for 1,000.
Available materials
| Material | Finish (vs. matte white) |
|---|---|
| White paper | Matte, Gloss +6% |
| Clear (transparent) | Standard (included) +14% |
| Freezer-grade white | Standard (included) +22% |
3.75 × 1.25 in labels per roll
| Core | Max. roll diameter | Up to (approx.) |
|---|---|---|
| 3″ core (standard) | 10″ | 9,400 labels |
| 1″ core | 5″ | 2,500 labels |
One label across, 3 mm between (approx.)
Your 3.75 × 1.25 in questions answered
Will a 3.75 × 1.25 in label fit a 1 oz dropper bottle?
Usually yes. A typical 1 oz dropper bottle is about 1.3 in across (4.1 in around) with roughly 1.75 in of straight wall. 3.75 in around and 1.25 in tall fits that space; measure your own container, because bottle makers vary by a few millimetres.
How much do 3.75 × 1.25 in labels cost?
$87.04 for 100 and $113.34 for 1,000 ($0.113 each) on matte white paper today, plus $45.00 setup once per design.
How many rolls will my 3.75 × 1.25 in order come on?
Each 3″-core roll holds about 9,400 and each 1″-core roll about 2,500, so divide your quantity by that to estimate the number of rolls.
Do 3.75 × 1.25 in labels need bleed?
Yes – add 1/16″ on each side for 3.875 × 1.375 in overall (1,163 × 413 px at 300 dpi) and keep text inside the cut line.
Similar sizes
- 2.75 × 1.75 in labels
- 3.25 × 1.5 in labels
- 6 × 0.75 in labels
- 4.5 × 1 in labels
- 3 × 1.5 in labels
- 2.25 × 2 in labels
- All label sizes
Ready for 3.75 × 1.25 in labels? Your price updates as you choose material and quantity.
Start my quote