Inicio / Tamaños de etiquetas / 3.75 × 1.25 in
Etiquetas de 3.75 × 1.25 in
With 4.69 square inches across 95 × 32 mm, the 3.75 × 1.25 in size is a slim strip about 3 times as long as it is tall. Typical homes for it: a wrap around the 1 oz dropper bottle (4.1 in round); the top of a deli container lid. For copy, count on about 7 lines of roughly 60 characters at 8 pt. A UPC-A barcode at 80% scale also fits. 1.25 × 3.75 is simply this size in the other orientation – same die, same price.
- Rectángulo
- 3.75 × 1.25 in
- 95.3 × 31.8 mm
- 4.69 sq in
Smallest run 250 = $99.77, setup $45.00 extra
Prices by quantity
| Cantidad | Etiquetas en rollo | Por etiqueta | Etiquetas en hoja |
|---|---|---|---|
| 250 | $103.46 | $0.414 | $99.77 |
| 500 | $116.77 | $0.234 | $112.60 |
| 1,000 | $124.48 | $0.124 | $120.03 |
| 2,500 | $148.24 | $0.059 | $142.95 |
| 5,000 | $211.79 | $0.042 | $204.23 |
| 10,000 | $300.82 | $0.030 | $290.08 |
CAD, matte white, pre-tax · +$45.00 setup/design No lamination (gloss or matte lamination can be added in the quote builder).
Starter pack: 100 labels for $55 + setup.
Good uses for the 3.75 × 1.25 in size
Full wrap: 1 oz dropper bottle
3.75 in around a 4.1 in body is a near-complete wrap; keep barcodes away from the 0.35 in seam.
Tops of deli container lids
The 4.1 in usable top takes it with a 0.15 in margin all round.
Locker and name strips
3.75 in fits a full name at 37 pt for lockers, cubbies and mailboxes.
Box seals
Placed over the opening, 1.9 in sits on each side of the seam.
Artwork advice
Keep text and logos inside a 3.625 × 1.125 in safe area and do not go below 7 pt. Place the barcode at least 0.2 in from either end – on the 1 oz dropper bottle the seam lands there.
Flat use: 4 × 1.5 in of face. Wrap use: about 1.27 in across or more, with 3.75 in going round.
Area-wise 3.75 × 1.25 in beats 2.25 × 2 in by 4%, and 2.75 × 1.75 in offers another 3%. The bigger 2.75 × 1.75 in runs about $4.03 extra for 1,000.
Available materials
| Material | Finish (vs. matte white) |
|---|---|
| Papel blanco | Matte, Gloss +6% |
| Transparente | Standard (included) +14% |
| Blanco para congelador | Standard (included) +22% |
3.75 × 1.25 in labels per roll
| Núcleo | Max. roll diameter | Up to (approx.) |
|---|---|---|
| Núcleo de 3" (estándar) | 10″ | 9,400 etiquetas |
| Núcleo de 1" | 5″ | 2,500 etiquetas |
One label across, 3 mm between (approx.)
Your 3.75 × 1.25 in questions answered
Will a 3.75 × 1.25 in label fit a 1 oz dropper bottle?
Usually yes. A typical 1 oz dropper bottle is about 1.3 in across (4.1 in around) with roughly 1.75 in of straight wall. 3.75 in around and 1.25 in tall fits that space; measure your own container, because bottle makers vary by a few millimetres.
How much do 3.75 × 1.25 in labels cost?
$103.46 for 250 and $124.48 for 1,000 ($0.124 each) on matte white paper today, plus $45.00 setup once per design.
How many rolls will my 3.75 × 1.25 in order come on?
Each 3″-core roll holds about 9,400 and each 1″-core roll about 2,500, so divide your quantity by that to estimate the number of rolls.
Do 3.75 × 1.25 in labels need bleed?
Yes – add 1/16″ on each side for 3.875 × 1.375 in overall (1,163 × 413 px at 300 dpi) and keep text inside the cut line.
Tamaños similares
- Etiquetas de 2.75 × 1.75 in
- Etiquetas de 3.25 × 1.5 in
- Etiquetas de 6 × 0.75 in
- Etiquetas de 4.5 × 1 in
- Etiquetas de 3 × 1.5 in
- Etiquetas de 2.25 × 2 in
- Todos los tamaños
Ready for 3.75 × 1.25 in labels? Your price updates as you choose material and quantity.
Empezar mi cotización