Home / Label sizes / 3.5 × 0.75 in
3.5 × 0.75 in labels
In metric, 3.5 × 0.75 in is 89 × 19 mm; in everyday terms, a little larger than a stick of gum. Measured against everyday packaging, it suits a wrap around the 1 oz dropper bottle (4.1 in round) and a standard 1.25 in shelf-edge channel. Inside the safe area there is room for about 3 lines of roughly 56 characters at 8 pt. Searching for 0.75x3.5? That is this label rotated; the price is identical.
- Rectangle
- 3.5 × 0.75 in
- 88.9 × 19.1 mm
- 2.63 sq in
100 labels: $108.94 · setup $45.00
What it costs
| Quantity | Roll labels | Per label | Sheet labels |
|---|---|---|---|
| 100 | $112.97 | $1.130 | $108.94 |
| 250 | $120.92 | $0.484 | $116.61 |
| 500 | $127.46 | $0.255 | $122.91 |
| 1,000 | $126.20 | $0.126 | $121.69 |
| 2,500 | $141.23 | $0.056 | $136.19 |
| 5,000 | $174.42 | $0.035 | $168.19 |
CAD, matte white, pre-tax · +$45.00 setup/design
3.5 × 0.75 in labels: typical jobs
1 oz dropper bottle wrap
Goes 3.5 in of the 4.1 in circumference, leaving a 0.6 in seam; the 0.75 in height stays under the 1.75 in wall.
Shelf-edge labels
0.75 in tall slides into a 1.25 in channel with 0.5 in to spare; 3.5 in fits price, name and code.
Flavour and scent stickers
Swap one 3.5 × 0.75 in label per variety; 2 lines at 10 pt is plenty for a name and a note.
Return address
Name, street and postcode across 3 lines of up to 56 characters.
Before you design
Guide lines first: 3.375 × 0.625 in for content, 1088 × 262 px for the full bleed canvas, 6 pt minimum type. On the 1 oz dropper bottle, leave the last 0.2 in of each end plain so the seam never cuts through words.
Fit check: as a front label it needs a flat panel of about 3.75 × 1 in; wrapped around a bottle, the 3.5 in length suits containers from roughly 1.19 in diameter up.
3.5 × 0.75 in gives you 0% more printable area than 2.625 × 1 in – 1.75 × 1.5 in has 0% more again.
Paper and film options for 3.5 × 0.75 in
| Material | Finish (vs. matte white) |
|---|---|
| White paper | Matte, Gloss +6% |
| Clear (transparent) | Standard (included) +14% |
| Freezer-grade white | Standard (included) +22% |
Rolls and cores
| Core | Max. roll diameter | Up to (approx.) |
|---|---|---|
| 3″ core (standard) | 10″ | 14,500 labels |
| 1″ core | 5″ | 3,900 labels |
Single lane, 3 mm spacing, approximate
Questions about this size
Can a barcode fit on 3.5 × 0.75 in labels?
A full UPC-A does not fit this face (it needs about 1.2 in by 0.85 in even at 80%). A QR code of 0.6 in or a short Code 128 SKU works instead.
How are 3.5 × 0.75 in labels priced?
The live engine quotes $112.97 for the minimum run of 100, then $126.20 at 1,000 – about $0.126 per piece – before the $45.00 setup.
Do 3.5 × 0.75 in labels work in a label dispenser?
Yes. Ask for a 3″ core for table-top dispensers (about 14,500 a roll) or a 1″ core for handheld ones (about 3,900).
Which file types work for 3.5 × 0.75 in label artwork?
PDF, AI, EPS, SVG, PNG or JPG. For raster files use 1,088 × 263 px (300 dpi), which matches the 3.625 × 0.875 in bleed size.
Similar sizes
- 2.625 × 1 in labels
- 1.75 × 1.5 in labels
- 2.75 × 1 in labels
- 2.5 × 1 in labels
- 2 × 1.25 in labels
- 5 × 0.5 in labels
- All label sizes
Ready for 3.5 × 0.75 in labels? Your price updates as you choose material and quantity.
Start my quote