Home / Label sizes / 2.625 × 1 in
2.625 × 1 in labels
2.625 × 1 inch is the familiar return-address size, the one used on 30-per-sheet office label sheets, so templates for it already exist in most word processors and mailing tools. Where it fits best: a wrap around the 15 ml essential oil bottle (3.1 in round), plus a standard 1.25 in shelf-edge channel. Text-wise, plan on about 5 lines of roughly 41 characters at 8 pt.
- Address label
- Rectangle
- 2.625 × 1 in
- 66.7 × 25.4 mm
- 2.63 sq in
$108.94 buys 100 (plus $45.00 setup)
Cost of 2.625 × 1 in labels
| Quantity | Roll labels | Per label | Sheet labels |
|---|---|---|---|
| 100 | $112.97 | $1.130 | $108.94 |
| 250 | $120.92 | $0.484 | $116.61 |
| 500 | $127.46 | $0.255 | $122.91 |
| 1,000 | $126.20 | $0.126 | $121.69 |
| 2,500 | $141.23 | $0.056 | $136.19 |
| 5,000 | $174.42 | $0.035 | $168.19 |
CAD, excludes tax, matte white paper – setup $45.00 per design.
Common jobs for 2.625 × 1 in labels
Return and mailing addresses
Four lines at 10 pt or five at 8 pt: name, street, city and postcode, the same layout as 30-per-sheet office labels.
15 ml essential oil bottle wrap
Goes 2.6 in of the 3.1 in circumference, leaving a 0.45 in seam; the 1 in height stays under the 1.45 in wall.
Lot and best-before strips
A 2.625 × 1 band holds a date, lot number and a 30-character note.
Bottom-of-pack labels
Under a tin or box, 67 × 25 mm carries the legal line without touching the front design.
Design tip for this size
Keep text and logos inside a 2.5 × 0.875 in safe area and do not go below 7 pt. Place the barcode at least 0.15 in from either end – on the 15 ml essential oil bottle the seam lands there.
For boxes and pouches allow 2.875 × 1.25 in of flat face. On cylinders the 2.625 in side wraps neatly once the diameter is at least 0.92 in.
5 × 0.5 in is the next size down, and 2.625 × 1 in adds 5%, and the larger 3.5 × 0.75 in adds 0% on top.
Choose a material
| Material | Finish (vs. matte white) |
|---|---|
| White paper | Matte, Gloss +6% |
| Clear (transparent) | Standard (included) +14% |
| Freezer-grade white | Standard (included) +22% |
2.625 × 1 in labels per roll
| Core | Max. roll diameter | Up to (approx.) |
|---|---|---|
| 3″ core (standard) | 10″ | 11,500 labels |
| 1″ core | 5″ | 3,000 labels |
Estimate: 1 across, 3 mm gap
Frequently asked
Is 2.625x1 the same as 1x2.625?
Yes – it is one label turned 90°. We list width first (2.625 in) and height second (1 in); on a roll you choose which edge comes off first in the builder, so both orientations use this page and the same price.
Is there a minimum order for 2.625 × 1 in labels?
Yes, 100 labels; that run is $112.97. At 1,000 you pay $126.20, near $0.126 apiece, and artwork setup adds $45.00 once.
How are 2.625 × 1 in labels wound?
One across on the roll, up to roughly 11,500 per 3″ core (3,000 on a 1″ core). You pick the unwind direction in the builder.
What size should my artwork be for 2.625 × 1 in labels?
2.75 × 1.125 in with bleed, which is 825 × 338 px at 300 dpi. Keep words 1/16″ inside the edge.
Similar sizes
- 3.5 × 0.75 in labels
- 1.75 × 1.5 in labels
- 2.75 × 1 in labels
- 2.5 × 1 in labels
- 2 × 1.25 in labels
- 5 × 0.5 in labels
- All label sizes
Ready for 2.625 × 1 in labels? Your price updates as you choose material and quantity.
Start my quote