Home / Label sizes / 3.5 × 1.75 in
3.5 × 1.75 in labels
In metric, 3.5 × 1.75 in is 89 × 44 mm; in everyday terms, a little smaller than a business card. Buyers usually put it on a wrap around the 1 oz dropper bottle (4.1 in round) or the top of a deli container lid. Expect about 10 lines of roughly 56 characters at 8 pt, and a full-size UPC-A barcode if you need one. Searching for 1.75x3.5? That is this label rotated; the price is identical.
- Rectangle
- 3.5 × 1.75 in
- 88.9 × 44.5 mm
- 6.13 sq in
Starts at $134.61 (100 labels), $45.00 setup
Price by quantity
| Quantity | Roll labels | Per label | Sheet labels |
|---|---|---|---|
| 100 | $139.60 | $1.396 | $134.61 |
| 250 | $144.40 | $0.578 | $139.24 |
| 500 | $152.32 | $0.305 | $146.88 |
| 1,000 | $167.73 | $0.168 | $161.74 |
| 2,500 | $210.48 | $0.084 | $202.97 |
| 5,000 | $270.45 | $0.054 | $260.79 |
CAD, matte white, pre-tax · +$45.00 setup/design
Who orders 3.5 × 1.75 in labels
Full wrap: 1 oz dropper bottle
3.5 in around a 4.1 in body is a near-complete wrap; keep barcodes away from the 0.6 in seam.
Tops of deli container lids
The 4.1 in usable top takes it with a 0.3 in margin all round.
Main product label
Name, net quantity and maker in 10 lines – the whole front panel on 89 × 44 mm.
Logo stickers
6.1 sq in shows a logo plus a web address readable from about 4.5 ft.
Design tip for this size
Design to 1088 × 562 px at 300 dpi, keep important type inside 3.375 × 1.625 in, and use 7 pt as the smallest size. Place the barcode at least 0.2 in from either end – on the 1 oz dropper bottle the seam lands there.
Panels should be at least 3.75 × 2 in. Wrapping the 3.5 in side? Containers of about 1.19 in diameter and up work.
Area-wise 3.5 × 1.75 in beats 4 × 1.5 in by 2% – 2.75 × 2.25 in offers another 1%. For 1,000 labels the step to 2.75 × 2.25 in is about $0.47.
Label stocks
| Material | Finish (vs. matte white) |
|---|---|
| White paper | Matte, Gloss +6% |
| Clear (transparent) | Standard (included) +14% |
| Freezer-grade white | Standard (included) +22% |
How many per roll
| Core | Max. roll diameter | Up to (approx.) |
|---|---|---|
| 3″ core (standard) | 10″ | 6,900 labels |
| 1″ core | 5″ | 1,800 labels |
One wide, 3 mm apart (estimate)
3.5 × 1.75 in label questions
Is 3.5x1.75 the same as 1.75x3.5?
Yes – it is one label turned 90°. We list width first (3.5 in) and height second (1.75 in); on a roll you choose which edge comes off first in the builder, so both orientations use this page and the same price.
How much are 3.5 × 1.75 in roll labels?
Starting at $139.60 (100 pcs); a run of 1,000 is $167.73, or $0.168 per label. Add $45.00 one-time setup.
Can I get 3.5 × 1.75 in labels on a 1 inch core?
Yes – roughly 1,800 max on 1″ (handheld dispensers), versus 6,900 on the standard 3″ core.
How do I set up 3.5 × 1.75 in label artwork?
Make the canvas 1,088 × 563 px (300 dpi) – that is 3.625 × 1.875 in including bleed – and keep text off the outer 1/16″.
Similar sizes
- 2.75 × 2.25 in labels
- 5 × 1.25 in labels
- 3 × 2 in labels
- 2 × 3 in labels
- 6 × 1 in labels
- 4 × 1.5 in labels
- All label sizes
Ready for 3.5 × 1.75 in labels? Your price updates as you choose material and quantity.
Start my quote