Home / Label sizes / 3.5 × 1.5 in
3.5 × 1.5 in labels
Picture a sugar packet: 3.5 × 1.5 in (89 × 38 mm) is a little larger than that. Typical homes for it: a wrap around the 1 oz dropper bottle (4.1 in round); the top of a deli container lid. That is space for about 9 lines of roughly 56 characters at 8 pt – enough for a full-size UPC-A barcode with a line or two above it. The same page covers 1.5 × 3.5: rotate the artwork and choose the unwind direction in the builder.
- Rectangle
- 3.5 × 1.5 in
- 88.9 × 38.1 mm
- 5.25 sq in
Minimum 100: $105.62 + $45.00 setup
Cost of 3.5 × 1.5 in labels
| Quantity | Roll labels | Per label | Sheet labels |
|---|---|---|---|
| 100 | $109.53 | $1.095 | $105.62 |
| 250 | $120.91 | $0.484 | $116.59 |
| 500 | $131.81 | $0.264 | $127.10 |
| 1,000 | $136.25 | $0.136 | $131.38 |
| 2,500 | $171.01 | $0.068 | $164.90 |
| 5,000 | $235.16 | $0.047 | $226.76 |
Canadian dollars before tax, white paper with a matte finish. Setup: $45.00 per design.
3.5 × 1.5 in labels: typical jobs
1 oz dropper bottle wrap
Goes 3.5 in of the 4.1 in circumference, leaving a 0.6 in seam; the 1.5 in height stays under the 1.75 in wall.
Deli container lids
About 4.1 in of flat top leaves roughly 0.3 in clear around this label.
Ingredient and care panels
Roughly 504 characters of ingredients, care or directions at 8 pt.
Box seals
Across a lid seam, 3.5 in spans both sides by 1.75 in each.
Artwork checklist
Set your canvas to 1088 × 488 px, put a 3.375 × 1.375 in guide inside it, and nothing smaller than 7 pt. Test-wrap a paper print around a 1 oz dropper bottle first; keep 0.2 in at each end free of text.
Fit check: as a front label it needs a flat panel of about 3.75 × 1.75 in; wrapped around a bottle, the 3.5 in length suits containers from roughly 1.19 in diameter up.
Compared with 4 × 1.25 in, 3.5 × 1.5 in has 5% more room, while the next step, 3 × 1.75 in, adds 0%.
Stocks and finishes
| Material | Finish (vs. matte white) |
|---|---|
| White paper | Matte, Gloss +6% |
| Clear (transparent) | Standard (included) +14% |
| Freezer-grade white | Standard (included) +22% |
3.5 × 1.5 in labels per roll
| Core | Max. roll diameter | Up to (approx.) |
|---|---|---|
| 3″ core (standard) | 10″ | 8,000 labels |
| 1″ core | 5″ | 2,100 labels |
Rough count: single file with a 3 mm gap
Good to know
What is 3.5 × 1.5 in in millimetres?
3.5 × 1.5 in = 89 × 38 mm (8.89 × 3.81 cm). The quote builder accepts centimetres too.
What does a run of 3.5 × 1.5 in labels cost?
Prices drop with volume: 100 labels are $109.53, 1,000 are $136.25 ($0.136 each). One $45.00 setup applies per design.
How many rolls will my 3.5 × 1.5 in order come on?
Each 3″-core roll holds about 8,000 and each 1″-core roll about 2,100, so divide your quantity by that to estimate the number of rolls.
Do 3.5 × 1.5 in labels need bleed?
Yes – add 1/16″ on each side for 3.625 × 1.625 in overall (1,088 × 488 px at 300 dpi) and keep text inside the cut line.
Similar sizes
- 3 × 1.75 in labels
- 2.75 × 2 in labels
- 2.5 × 2 in labels
- 5 × 1 in labels
- 4 × 1.25 in labels
- 4.5 × 1.25 in labels
- All label sizes
Ready for 3.5 × 1.5 in labels? Your price updates as you choose material and quantity.
Start my quote