Home / Label sizes / 2 × 1.75 in
2 × 1.75 in labels
2 × 1.75 in works out to 51 × 44 mm – a little larger than a matchbook. Measured against everyday packaging, it suits a wrap around the 10 ml roller bottle (2.35 in round) and the top of an 8 oz candle tin lid. Text-wise, plan on about 10 lines of roughly 30 characters at 8 pt; a full-size UPC-A barcode fits too. Portrait or landscape, 2 × 1.75 and 1.75 × 2 are one product here.
- Rectangle
- 2 × 1.75 in
- 50.8 × 44.5 mm
- 3.5 sq in
Minimum 100: $76.16 + $45.00 setup
Today's prices
| Quantity | Roll labels | Per label | Sheet labels |
|---|---|---|---|
| 100 | $78.98 | $0.790 | $76.16 |
| 250 | $96.24 | $0.385 | $92.81 |
| 500 | $108.97 | $0.218 | $105.08 |
| 1,000 | $100.20 | $0.100 | $96.62 |
| 2,500 | $120.71 | $0.048 | $116.40 |
| 5,000 | $180.03 | $0.036 | $173.60 |
Canadian dollars before tax, white paper with a matte finish. Setup: $45.00 per design.
Popular uses for 2 × 1.75 in labels
Wraps for 10 ml roller bottles
On a 10 ml roller bottle (about 0.75 in across) the 2 in side runs round the body with 0.35 in to spare where the ends meet.
8 oz candle tin lids
About 2.9 in of flat top leaves roughly 0.45 in clear around this label.
Sample bags
On a 3 in wide pouch the 51 × 44 mm label covers the middle, not the whole bag.
Box seals
Across a lid seam, 2 in spans both sides by 1 in each.
Getting the layout right
Keep text and logos inside a 1.875 × 1.625 in safe area and do not go below 7 pt. Wrapped jobs: nothing important within 0.1 in of the left and right ends, where the seam lands.
On flat packs allow 2.25 × 2 in. On round containers the 2 in side wraps a 0.72 in diameter or larger.
2 × 1.75 in is 0% larger in area than 3.5 × 1 in – 5 × 0.75 in is 7% bigger still.
Stocks and finishes
| Material | Finish (vs. matte white) |
|---|---|
| White paper | Matte, Gloss +6% |
| Clear (transparent) | Standard (included) +14% |
| Freezer-grade white | Standard (included) +22% |
2 × 1.75 in labels per roll
| Core | Max. roll diameter | Up to (approx.) |
|---|---|---|
| 3″ core (standard) | 10″ | 6,900 labels |
| 1″ core | 5″ | 1,800 labels |
One label across, 3 mm between (approx.)
Common questions
Will a 2 × 1.75 in label fit a 10 ml roller bottle?
Usually yes. A typical 10 ml roller bottle is about 0.75 in across (2.35 in around) with roughly 2 in of straight wall. 2 in around and 1.75 in tall fits that space; measure your own container, because bottle makers vary by a few millimetres.
What is the price of 2 × 1.75 in labels?
Today's engine price: 100 roll labels $78.98, 1,000 labels $100.20, roughly $0.100 apiece. Setup is $45.00 per artwork.
How many 2 × 1.75 in labels fit on one roll?
Up to about 6,900 on a 3″ core or 1,800 on a 1″ core. Fewer per roll costs the same.
Do 2 × 1.75 in labels need bleed?
Yes – add 1/16″ on each side for 2.125 × 1.875 in overall (638 × 563 px at 300 dpi) and keep text inside the cut line.
Similar sizes
- 3.5 × 1 in labels
- 2.75 × 1.25 in labels
- 2.25 × 1.5 in labels
- 5 × 0.75 in labels
- 3 × 1.25 in labels
- 2.5 × 1.5 in labels
- All label sizes
Ready for 2 × 1.75 in labels? Your price updates as you choose material and quantity.
Start my quote