Inicio / Tamaños de etiquetas / 2 × 0.5 in
Etiquetas de 2 × 0.5 in
With 1 square inches across 51 × 13 mm, the 2 × 0.5 in size is a slim strip about 4 times as long as it is tall. Typical homes for it: a wrap around the 10 ml roller bottle (2.35 in round); the top of a 63 mm jar lid. Keep it to one element – 30 characters, a number or a small logo. The same page covers 0.5 × 2: rotate the artwork and choose the unwind direction in the builder.
- Rectángulo
- 2 × 0.5 in
- 50.8 × 12.7 mm
- 1 sq in
Minimum 250: $160.80 + $45.00 setup
Price by quantity
| Cantidad | Etiquetas en rollo | Por etiqueta | Etiquetas en hoja |
|---|---|---|---|
| 250 | $166.76 | $0.667 | $160.80 |
| 500 | $167.71 | $0.335 | $161.72 |
| 1,000 | $169.63 | $0.170 | $163.57 |
| 2,500 | $175.44 | $0.070 | $169.17 |
| 5,000 | $189.89 | $0.038 | $183.11 |
| 10,000 | $218.81 | $0.022 | $210.99 |
Canadian dollars before tax, white paper with a matte finish. Setup: $45.00 per design. No lamination (gloss or matte lamination can be added in the quote builder).
Starter pack: 100 labels for $55 + setup.
Common jobs for 2 × 0.5 in labels
10 ml roller bottle wrap
Goes 2 in of the 2.35 in circumference, leaving a 0.35 in seam; the 0.5 in height stays under the 2 in wall.
Lid label: 63 mm jar lid
Sits inside the 2.3 in flat area with 0.15 in of rim showing – no lifting at the edge.
Locker and name strips
Cubby and mailbox names at 15 pt across a 2 in strip.
Cable and cord flags
Fold a 2 in strip around a cord so the 0.5 in tag shows on both sides of the fold.
Print-ready tips
Guide lines first: 1.875 × 0.375 in for content, 638 × 188 px for the full bleed canvas, 6 pt minimum type. Place the barcode at least 0.1 in from either end – on the 10 ml roller bottle the seam lands there.
Leave room: 2.25 × 0.75 in of flat surface is ideal. If you wrap it, containers near 0.72 in across (with the 2 in side going around) leave a small seam gap.
Against 1.25 × 0.75 in you gain 7% more face with 2 × 0.5 in, and going up to 1.5 × 0.75 in gives 13% more.
Available materials
| Material | Finish (vs. matte white) |
|---|---|
| Papel blanco | Matte, Gloss +6% |
| Transparente | Standard (included) +14% |
| Blanco para congelador | Standard (included) +22% |
Roll capacity
| Núcleo | Max. roll diameter | Up to (approx.) |
|---|---|---|
| Núcleo de 3" (estándar) | 10″ | 21,000 etiquetas |
| Núcleo de 1" | 5″ | 5,500 etiquetas |
Single lane, 3 mm spacing, approximate
Preguntas frecuentes
Is 2x0.5 the same as 0.5x2?
Yes – it is one label turned 90°. We list width first (2 in) and height second (0.5 in); on a roll you choose which edge comes off first in the builder, so both orientations use this page and the same price.
What does a run of 2 × 0.5 in labels cost?
Prices drop with volume: 250 labels are $166.76, 1,000 are $169.63 ($0.170 each). One $45.00 setup applies per design.
What roll sizes do 2 × 0.5 in labels ship on?
Standard 3″ cores hold up to about 21,000; 1″ cores, for handheld guns, about 5,500. Big orders are split across rolls at no charge.
What size should my artwork be for 2 × 0.5 in labels?
2.125 × 0.625 in with bleed, which is 638 × 188 px at 300 dpi. Keep words 1/16″ inside the edge.
Tamaños similares
- Etiquetas de 1.25 × 0.75 in
- Etiquetas de 1.5 × 0.75 in
- Etiquetas de 1.75 × 0.5 in
- Etiquetas de 2.5 × 0.5 in
- Etiquetas de 1.25 × 1 in
- Etiquetas de 1.75 × 0.75 in
- Todos los tamaños
Ready for 2 × 0.5 in labels? Your price updates as you choose material and quantity.
Empezar mi cotización